PRODUCT INSTALLATION AND OPERATION INSTRUCTIONS:
Please pay attention to place your light in a non-shaded place with
sufficient sunshine provided for its operation. Before turning your light
on the first time, please place the light in a sunny place in a position where
the solar panel face the sun at midday, and leave the light charging the
battery for 2-3 days.
Recommended installation height: 2-3 m.
1.
Pay attention to locate the light in a place on your wall where sufficient
sunlight is provided daytime to charge your light. Measure the location
of the holes correctly, and drill the holes on the wall.
2.
Push the wall anchors inside the holes, and drive the screws into the
anchors.
3.
Place the light gently on the screws with its fixing points.
1.
Charging by solar energy will start automatically during daytime.
2.
The light sensor turns on your light at dusk, and keeps it at dimmed
mode (2 W). Whenever motion is detected by the microwave sensor, the
light will switch to maximum power (10 W).
3.
Once no motion is detected anymore, the light maintains full power
output for 30 seconds before switching back to dimmed power mode.
5
Summary of Contents for MOONSTONE
Page 2: ...2 ...
