background image

PRODUCT STRUCTURE DIAGRAM, CONTENT OF THE BOX

1. Solar panel

2. Fixing points on the rear panel

3. ON/OFF (and color changing)

    button

4. Microwave sensor

5. LED tube

6. Wall anchors

7. Screws

8. Graphical element aid for

    positioning the holes on the

    wall (located on the side of the

    box. If it is needed for position-

    ing, please use scissors for

    cutting it out).

ATTENTION! The life span of the battery depends on you as well! Please use the light 

correctly as described in this manual by positioning it in a sunny place where sufficient 

sunlight is provided for charging the battery every day. If you intend to turn off your light, 

and you do not want to use it for a while, please make sure that the battery has sufficient 

charge, and it is not totally discharged. If you would like to store the light instead of using 

it, please turn off the light with the ON/OFF button. In case of a longer storage, please 

turn on the light once every month, put it in a sunny place in the morning, and turn it off 

at dusk. In this case the light can be stored again for another month.  It may decrease the 

life span of the battery if the light is stored for a longer period with a totally discharged 

battery, moreover it can damage the battery!
ATTENTION!  The  light  sensor  switches  off  the  light  even  at  night  if  it  receives  high 

luminosity lighting from above! Do not place your light in a position where other light 

sources can hinder its operation (e.g. do not place the light below high luminosity street 

light)!

ATTENTION! Battery is built-in, non-replaceable!

4

Summary of Contents for MOONSTONE













Reviews: