background image

USER INSTRUCTIONS, INFORMATION

1. 

After receiving your light, please open the light’s box gently with paying 

attention not to cause harm to the light and its parts.

2. 

Before starting to use your light, please make sure that there are no 

visible damages on the light and its parts.

3. 

If you observe breaking, crack, fracture on the light or on its parts, 

please do not use the product, but contact us for replacement.

4. 

Please do not apply strong physical force on the product that can 

damage the light or its parts. Non-ordinary use of the product results 

the loss of product warranty.

5. 

Please keep the box, the packaging material, and the content out of the 

reach of children, and pets. There are small objects among the parts 

of the light, which children or pets can ingest, or can cause harm to 

themselves with.

6. 

Please do not disassemble the light, do not bend the light, or apply 

physical stress on the light. Please follow the user manual’s instructions 

for installation, and operation. 

7. 

Do not expose the light to higher heat than natural caused by weather 

changes. Excessive heat may damage more constituents of the light.

8. 

Do not expose the light to continuous high- or low-pressure water flow, 

even if you intend to clean your light. The IP65 protection does not mean 

you can put the light in water, or you can wash the light with continuous 

water stream. The next chapter declares the right method of cleaning.

9. 

Please always contact Malatech Water, Ltd, or a professional appointed 

by our company if you intend to disassemble the light, remove any 

of its parts, or service the light. Service attempts made by users are 

prohibited, and result the loss of product warranty.

ON/OFF button operation: Considering the light to be turned off, pressing 

the ON/OFF button turns on the light. If it is done daytime, the light will 

shine for a few seconds, then it will be deactivated by the light sensor 

but the light will be on, and activated by the light sensor at dusk. You can 

switch between cold white, and warm white light colors by pressing the 

ON/OFF button shortly. By keep pressing the ON/OFF button for multiple 

seconds the light will switch off.

6

Summary of Contents for MOONSTONE













Reviews: