45
07/08
50 cc - 4 T
Top bearings (Ø 3/16") n° 22
Lower bearings (Ø 1/4") n° 19
B
12 ± 10%
A
140 ± 15%
V
30 ± 20%
V
A
B
F. 112
F. 113
B
A
F. 114
C
C
A
B
S
S
FORK LEG
• Loosen (V)
• Raise the fork leg a few
millimetres (A).
• Take out the elastic ring (B)
• Slide out the fork leg (A)
downwards.
FORK
NOTE - When removing the fork leg, as well
as the full fork, the following should
be removed beforehand:
- Front wheel (page 42)
- Front mudguard (page 41)
- Front brake calliper (page 43)
(left wheel stem)
For the full fork, also remove the:
- Front shield (page 44)
- Handlebar (page 44)
• To check the oil level and to change oil,
see page 15).
FULL FORK
• Upper ring nut (A)
• Lower ring nut (A)
NOTE - When extracting the fork unit, take care with the bearings (S) spilling out.
• Remove grease the seat of the caps (C). Check the usage conditions and if
necessary replace them.
Grease and remount the fork unit.
Summary of Contents for CENTRO SO 4T
