![background image](http://html.mh-extra.com/html/malaguti/centro-so-4t/centro-so-4t_service-manual_697649043.webp)
42
07/08
50 cc - 4 T
FRONT WHEEL
• Unscrew the nut (D), holding the wheel pin with a wrench.
FRONT BRAKE DISC
• When removing the front
wheel, check the condition of
the brake disc. In case of
deep scoring or if the thick-
ness is below the minimum
limit of 3.5 mm, remove it
by unscrewing the screws
(V5) and replace it.
V
5
11 ± 10%
• V.
• Spacer (A).
• V3.
• Remove the wheel pin (P).
• Take off the wheel.
• Pay attention not to lose the
spacer (A).
Do not use the brake
lever, with the wheel
removed.
• Remove the front mudguard.
F. 102
F. 103
F. 104
F. 105
P
A
D
V
5
V
3
3 ± 10%
Apply Loctite threadlocker (Strong type) on the screw threading.
V
3
A
V
Summary of Contents for CENTRO SO 4T
