51
07/08
50 cc - 4 T
• Slide off the pin (P).
Remember to fit the
washer.
F. 133
P
F. 134
FRAME SIZE CHECK
• In case of suspected deformation (even slight) of the frame following an
accident, perform a size check of the frame.
Check that the distance A = 1132 mm ( ± 2mm tolerance)
• If it results to be outside of the tolerance, replace the frame.
It is absolutely forbidden to deform the frame to restore the
original distance (A).
Raise the rear part of the motorcycle before sliding off the engine pin. It is advisa-
ble to have a second operator available to help carry out this operation.
Removing the engine from the frame is a task that should be performed with care
and the utmost attention, in order to avoid crushing of the hands, lower limbs and
safeguard the integrity of the engine.
The removal of parts and components that allow the engine to be separated from
the frame includes a certain number of bands being cut. These must be replaced
and positioned as they were originally. For this purpose, consult the illustrations
on the following pages.
Summary of Contents for CENTRO SO 4T
