MAKSIWA CBC.EC, Instruction Manual

Page: 5 / 18

5
UNPACKING AND ASSEMBLY
Due to modern mass production techniques, it is
unlikely that Edgebander CBC.E MAKSIWA is faulty
or have parts missing. If you find anything wrong, do
not use the machine until the parts are replaced or
the fault is corrected. By doing this you are avoiding
serious injury.
Step 01: Open box and tip on to it’s back.
Step 02: Slide machine out using plastic wrap.
Remove inner plastic wrap.
Step 03: Flip legs down and install cross bars – Note
tapered ends.
Step 04: Add rubber feet.
Step 05: Lift machine onto feet, install angled
extension plate on rear corner.
Step 06: Plug machine in to test power.