MAKSIWA CBC.EC, Instruction Manual

Page: 4 / 18

4
parts and will need to know where they are.
Especifications
Power: 1.500 W
Tape Thickness: 0,3 a 2,0 mm
Max. Tape Width: 80 mm (3’’)
Min. Worpiece Length: 120 mm (4 3/4’’)
Feeder Speed: 5,5 m/min (18 ft/min)
Temperature Range: 120°C to 220°C (248°F to 428°F)
Voltage: 110V – 1 phase
Net Weight: 52 Kg (115 pounds)
Transport and Installation
By ergonomic issues, this equipment must be carried
by at least two people, holding by the handles located
on the sides of the box.
For packaging purposes, the machine is not fully
assembled. If you notice any damage caused by
transportation, while you open the package, notify
your supplier immediately. Do not operate the
machine.
Dispose the packaging in a friendly way with the
environment.
The Edgebander is designed to operate indoors and
should be placed on a firm, stable and level surface.
CAUTION: To prevent the machine from moving and
causing lack of precision, ensure that the base where
it is supported is not uneven.
• Do not attempt to operate the machine in another
voltage beyond designated.
• Do not use larger or smaller tools than recommended.
• Do not apply lubricant to the tools during use.
• Do not operate without some parts of the machine.
• Do not put your hands less than 4in from the shaft.
• Do not put your hands in closed parts of the machine
unless it is turned off and unplugged.
• Do not use lubricants or cleaners (particularly sprays
and aerosols) in the vicinity of the plastic guard. The
polycarbonate material used in the guard is sensitive
to certain chemicals.
WARNING: Some dust created by the act of sanding,
cutting, grinding, drilling and other construction-
related activities contains chemicals that can cause
cancer, birth defects or other reproductive harm.
Some examples of these products are: Lead-based
paint; crystal silica bricks, concrete and other masonry
products; and arsenic and chromium from chemically
treated wood.
CAUTION: Do not connect the unit to the power outlet
until all instructions have been read and understood.
Always tighten the adjustment tabs before using the
machine. Think: “I can prevent accidents”.
Do not operate the machine unless the guards are in
their proper places. Always use protective goggles.
Electrical connection
The Edgebander CBC.E MAKSIWA has engine 1-phase
110V. To avoid burning risk, check the voltage of your
outlet before starting the machine. If necessary make
the change of your power with the help of a specialist.
Ensure that your power supply is in accordance with
the designated on the board. A 10% decrease in voltage
or more will cause loss of power and overheating. All
equipment MAKSIWA are tested at the factory. If this
machine does not work, check the electricity supply.
Check the compatibility of your outlet and plug the
machine. Do not do patches and adaptations.
To avoid electrical shock and damage to the equipment
always ground the machine.
Familiarization
Put the machine on a smooth and flat surface. Check
the pictures and watch the descriptions to familiarize
yourself with its components. The next section will
deal with the necessary adjustments for the proper
functioning of the machine. You should know these