MAKSIWA CBC.EC, Instruction Manual

Page: 10 / 18

10
• Check wear manual cutters.
ELETRIC PANEL
NEVER MOVE OR DO MAINTENANCE ON THE
ELECTRIC PANEL WITH MACHINE ON OR
CONNECTED ON THE POWER SUPPLY. LOOK FOR
SERVICE AUTHORIZED MAKSIWA WHEN YOU NEED
TO HANDLE THE ELECTRIC PANEL.
Attached follows the wiring diagram of Edgebander
CBC.E for possible maintenance.
WARRANTY TERM
The MAKSIWA assures the owner of his equipment,
identified by the date of issue of the purchase invoice,
a warranty of one (1) year, as follows:
1. The warranty period begins on the date of the
commercial invoice.
2. Within the warranty period, the hand labor and the
components replaced by manufacturing defect will be
provided for free as long as duly proved by Maksiwa
Service.
3. Third-party manufacturing equipment that makes
up the MAKSIWA equipment (such as motors,
electrical equipment, belts etc.) are subject to the
terms and conditions of warranty of their respective
manufacturers.
4. In case of exchange for the warranty, please return
the defective part for the manufacturer urgently.
5. Costs and risks of transport will be by the machine
owner.
6. Equipment installation expenses and workplace
adaptations are due to the machine owner.
7. When you notice any defect or malfunction when
receiving the equipment, get in touch immediately
with the manufacturer or resale. Do not turn it on.
8. Not included in this warranty technical visits aimed
at cleaning or adjustments caused by wear, resulting
from normal use of the equipment.
9. The warranty does not cover problems caused by
mistreatment, carelessness, misuse or inappropriate
use of the functions designed for this equipment in
this manual, as well as poorly executed operations by
untrained operators to operate it.
TECHNICAL ASSISTENCE
10. The MAKSIWA is not responsible for lost
productivity, direct or indirect damages caused to
the owner of the equipment or to third parties, or any
other expense, including lost profits.
11. Even under warranty, you may lose its validity as
follows:
a) Application of non-original components;
b) Alteration of its original features;
c) Lack of proper maintenance;
d) Improper use of the equipment;
e) Change in equipment or electronic connections;
f) Damage caused by mechanical shock or exposure to
unsuitable conditions (humidity, salt spray, corrosive
agents, etc.);
g) Damage caused by bad weather (floods, flooding,
lightning, power outages etc.).
For your safety, trust the repairs, maintenance and
adjustments (including inspection and replacement)
for technical assistance recommended by MAKSIWA,
always use genuine spare parts and accessories,
reassembling to its original Edgebander the same
way.
Manufactured by:
Maksiwa Industria e Comercio de Maquinas LTDA.
St Nelson Argenta, 436
Colombo – Parana – Brazil
Zipcode: 83402-220
CNPJ: 76.670.215/0001-81
www.maksiwa.com