BACKLIGHT
LED Flashlight
It enables you to adjust the keypad and display backlight level according to your personal
preferences. It ranges between 00-05. Backlight setting is restored to the final setting when the
device is turned off and on again. This setting is common in all modes; change made in any
mode also applies to the other modes.
Keypad and backlight is not lit when it is set to 00 level. When set between 01-05, it is lit when a
target is detected or while navigating the menu and then it goes off.
If you need the keypad and backlight to be lit continuously, after adjusting it to the desired
value, press the down button while keeping the trigger pulled back. Display and backlight will
be continuously on upon performing this action. Repeat the above procedure to cancel the
continuous operation.
It is the light used for lighting the scanned area while performing search at night or dark
locations. LED flashlight does not operate when the device is off. It is recommended to turn it on
when necessary since its operation consumes battery charge.
Keeping the trigger pulled back, press the up button once to activate the LED flashlight. Repeat
the same procedure to turn it off.
Menu
Page_9