24
4.
If there is no ground effect on the device, none of the “Cavity and
Mineral” and “Metal and Mineral” lights will be on. And this means that
the device is suitable for a search on that ground.
5.
If there is a ground effect on the device, the “METAL and MINERAL”
or “CAVITY and MINERAL” lights of the device will be on.
6.
In case of a warning for “METAL and
MINERAL”:
a. Raise the search cap of the device by 40 cm from the ground and
hold it parallel to the ground. Press the (+) button a few times. Then have
a reset immediately.
b. Lower the search cap back to 5-10 cm. distance parallel to the
ground again.
RESET
Summary of Contents for JEOTECH
