Makro Detektor JEOTECH, User Manual

Page: 21 / 32

21
Use of Reset Button:
When using the device, there may be some
interferences due to moving the search cap in
an unbalanced manner and the environment.
Such interferences cause the device to turn on
the screen lights and generate a sound alert.
Reset terminates the effect of these
interferences. The reset takes place by
pressing the button below the handle of the device. Reset should not be
made when the search button is on the target! This causes loss of depth,
assessment of the received signal in a mistaken manner and makes the
device unable to detect the target.
Reset takes place after the search
cap is taken to a side off the target.
Don't forget to reset after every action you take! (Exercise due care not
to reset on the target.)
Using the SCAN Button:
When target is detected during search, the
device is moved off the target and the "SCAN"
button is pushed again and the device is
moved over the target once more; the target is
analyzed
in the meanwhile. If the
"VALUABLE" light is on when passing over the
target, then the target is valuable and if the
"INVALUABLE" light is on, then the target is
invaluable.
Sensitivity Setting:
After turning on the device, “SENSITIVITY”
button may be used for Sensitivity button.
Sensitivity setting takes place between “Min 1”
and “Min2” and “Max”.