Mako 6500-A2 and A2/3G Product Handbook v.1.2
Page
10
of
24
These LEDs will only be used for diagnostics and configuration. During normal operation you
needn’t worry about the status of these LEDs.
Key
Name
On
Off
Flashing
1
Power
Indicates that the Mako is
connected to a power
source
Mako is off
2
TX/RX
Internet data activity
3
LINK
An active and established
DSL connection to your
service provider
No DSL
connection or
service provider
outage
A DSL connection to
your service provider
during configuration
4
TX/RX
Data activity with LAN 1
5
LAN 1
Link is present with LAN 1
6
TX/RX
Data activity with LAN 2
7
LAN 2
Link is present with LAN 2
8
WAN 1
The Mako has established
a connection to your ISP
DSL isn’t
connected
PPP is connecting. Slow
flash – DSL is training
9
READY
(ADSL Only)
All Mako services are
ready to operate
9
WAN2
(3G Only)
The Mako has established
a connection to your ISP
and the Mako is ready
Mobile data not
connected
Dial tone established.
Slow flash – unable to
establish a dial tone.
10
ERROR
An error condition exists
Refer to Chapter 5.2 Diagnosing the Mako 6086-A2 Panel Indicators on page 14 below for details
on error messages relayed through these Panel LEDs.
When the LINK, WAN and READY LEDs are glowing, your Mako is connected to the Internet and
ready for use.
