![background image](http://html.mh-extra.com/html/makita/xrt02/xrt02_instruction-manual_1722988012.webp)
12 ENGLISH
Replacing wire guide B
Optional accessory
The wire guide B (in silver color) in the arm can be
replaced with an optional wire guide B (EG) (in black
color) according to the type of tying wire to use.
Find the right combination in the following table. Then
replace the standard equipped wire guide B with an
optional wire guide B (EG) if necessary.
Standard
equipped wire
guide B complete
(silver)
Optional wire
guide B complete
(black)
Annealing iron tie wire
Poly coated tie wire
-
Galvanized tie wire
-
— : The combination is not valid.
1.
Loosen bolts A and B using the hex wrench
included in the tool package.
1
Fig.20
►
1.
Hex wrench
1
2
3
4
Fig.21
►
1.
Bolt A
2.
Bolt B
3.
Contact plate cover
4.
Standard
equipped wire guide B (silver)
NOTICE:
Do not forcibly remove any bolts that
cannot be removed using the hex wrench.
2.
Pull the contact plate cover up in the direction of the
arrow and remove it. Bolt B will be removed at the same time.
1
2
Fig.22
►
1.
Contact plate cover
2.
Bolt B
3.
Remove bolt A, and remove the standard
equipped wire guide B (silver).
1
2
Fig.23
►
1.
Bolt A
2.
Standard equipped wire guide B (silver)
4.
Replace the standard equipped wire guide B (in silver
color) with an optional wire guide B (EG) (in black color).
1
Fig.24
►
1.
Optional wire guide B (EG) (in black color).
Summary of Contents for XRT02
Page 47: ...47 ...