![background image](http://html.mh-extra.com/html/makita/xrt02/xrt02_instruction-manual_1722988002.webp)
2 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model:
XRT02
Tie wire (Optional accessory)
Annealing iron tie wire
ø0.8 mm (21GA)
Poly coated tie wire
ø0.9 mm (20GA)
Galvanized tie wire
*1
ø0.8 mm (21GA)
Approximate number of ties
per reel
Annealing iron tie wire
Approximately 75 ties
Poly coated tie wire
Approximately 65 ties
Galvanized tie wire
*1
Approximately 75 ties
Overall length
317 mm (12-1/2″)
Rated voltage
D.C. 18 V
Net weight
2.4 - 2.7 kg (5.3 - 6.0 lbs)
*1
Available only when an optional wire guide B complete (EG) is installed in the arm.
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications and battery cartridge may differ from country to country.
•
The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi
-
est combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
BL1815N / BL1820B / BL1830 / BL1830B / BL1840B / BL1850B / BL1860B
Charger
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF / DC18SH
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above.
Use of any other battery cartridges
and chargers may cause injury and/or fire.
Combination of rebars that can be tied
Combination of 2 rebars
#4 (13 mm)
#5 (16 mm)
#6 (19 mm)
#7 (22 mm)
#4 (13 mm)
*
-
-
-
#5 (16 mm)
*
-
-
#6 (19 mm)
-
#7 (22 mm)
#8 (25 mm)
#9 (29 mm)
-
#10 (32 mm)
-
-
#11 (35 mm)
-
-
-
*
The combination is not designed for high tying strength.
Summary of Contents for XRT02
Page 47: ...47 ...