15 ENGLISH
3.
Rotate the Tuning control knob and the display
will show the frequency options for the alarm.
The alarm options are as follows:
ONCE
The alarm will sound
once
DAILY
The alarm will sound
everyday
WEEKDAYS
The alarm will sound only
on weekdays
WEEKENDS
The alarm will sound only
at weekends
4.
Press the Tuning control knob
to confirm the
setting.
NOTE:
There is no volume adjustment for buzzer
alarm.
When the alarm sounds
To cancel a sounding alarm, press the Power button
.
Disabling/cancelling alarms
To disable an active alarm, press and hold the corre-
sponding alarm button to cancel the alarm.
Snooze
When the alarm sounds, press any button other than
the Power button
to stop the alarm for 5 minutes.
"SNOOZE" will appear on the display.
To adjust the silence time, follow the procedures below:
1.
Press and hold the Menu/Info button
INFO
MENU
to enter
the menu setting.
2.
Rotate the Tuning control knob until "SNOOZE"
appears on the display. Press the Tuning control
knob to enter the setting. Rotate the Tuning control
knob
to adjust the silence time from 5, 10, 15 and 20
minutes.
NOTE:
To cancel the snooze timer while the alarm is
suspended, press the Power button
.
Sleep timer
Your radio can be set to turn off automatically after a
preset time has elapsed. The Sleep Timer setting can
be adjusted for 15, 30, 45, 60, 90, or 120 minutes.
1.
Press and hold the Power button
to enter
the Sleep Timer setting. “SLEEP 60 MINUTES” will be
shown on the display.
2.
Keep holding the Power button
. The sleep timer
options will start switching on the display. Release the
Power button
when the desired Sleep Timer setting
appears on the display. The setting will be saved and the
icon for sleep timer (
) will appear on the display.
NOTE:
Your radio will switch off automatically after
the preset Sleep Timer has elapsed.
NOTE:
To cancel the sleep timer before the preset
time has elapsed, simply press the Power but-
ton
to turn the radio off.
Loudness
You can get compensation on lower and higher
frequency for your radio by adjusting the loudness
function.
1.
Press and hold the Menu/Info button
INFO
MENU
to enter
the menu setting.
2.
Rotate the Tuning control knob until
<LOUDNESS> appears on the display. Press the
Tuning control knob to enter the setting.
3.
Rotate the Tuning control knob to choose
<ON> or <OFF> to turn on or turn off the loudness func
-
tion, then press the Tuning control knob
to confirm
the setting.
NOTE:
To turn off the loudness function, select
<OFF> and press the Tuning control knob to con-
firm the setting.
Listening to Bluetooth
®
music
You need to pair your Bluetooth
®
device with your radio
before you can auto-link to play/stream Bluetooth
®
music through your radio. Paring creates a permanent
“bond” so two devices can always recognize each other.
Pairing your Bluetooth
®
device
1.
Press the Source button
to select Bluetooth
®
function. "READY BLUETOOTH" will be shown on the
display and "READY" will flash.
2.
Activate Bluetooth
®
on your device according to
the device’s user manual to allow the paring procedure.
3.
Press and release the Pair button
. "PAIR
BLUETOOTH" will be shown on the display and it will
flash. You can start the search of your radio on your
Bluetooth
®
device. Once the name of your radio is
appeared on your Bluetooth
®
device, press the item in
your Bluetooth
®
list.
NOTE:
With some mobiles (versions earlier than
BT2.1 Bluetooth
®
device), you may need to input the
pass code “0000”.
4.
Your Bluetooth
®
device will be linked with the
radio. Once connected, “CONNECTED BLUETOOTH”
will appear on the display.
You can now play the music in your Bluetooth
®
device
via your radio.
Playing Bluetooth
®
device which has
already paired
1.
Press the Source button
to select Bluetooth
®
function. "READY BLUETOOTH" will be shown on the
display and "READY" will flash.
2.
Search and link the radio on your Bluetooth
®
device. Some device may link with the radio
automatically.
You can now play the music in your Bluetooth
®
device
via your radio.