Makita XRM10, Instruction Manual, Page: 14 / 36

14 ENGLISH
4. Rotate the Tuning control knob to select either
<12 HOUR> or <24 HOUR> format. Press the Tuning
control knob to confirm your choice.
NOTE: If the 12 hour clock format is chosen, the radio
will then use the 12 hour clock for the setting.
5.
Press and hold the Menu/Info button
INFO
MENU
to enter
the menu setting.
6. Rotate the Tuning control knob until <TIME>
appears on the display and press the Tuning control
knob to enter the setting.
7. Rotate the Tuning control knob until <DATE
FORMAT> appears on the display and press the control
knob to enter the setting.
8.
Rotate the Tuning control knob to select the
desired date format (<DD/MM/YYYY> or <MM/DD/
YYYY>). Press the Tuning control knob to confirm
your choice.
Setting the time
1. Press and hold the Menu/Info button
INFO
MENU
.
2. Rotate the Tuning control knob until <TIME>
appears on the display. Press the Tuning control
knob to enter the setting.
3. Press the Tuning control knob while <SET
TIME> appears on the display to enter the setting.
4. The hour setting on the display will begin flashing.
Rotate the Tuning control knob to select the desired
hour, and press the Tuning control knob to confirm
the setting. Then rotate the Tuning control knob to
select the desired minute, and press the Tuning control
knob to confirm the setting.
Setting the date
1.
Press and hold the Menu/Info button
INFO
MENU
.
2. Rotate the Tuning control knob until <TIME>
appears on the display. Press the Tuning control
knob to enter the setting.
3.
Rotate the Tuning control knob until <SET
DATE> appears on the display. Press the Tuning control
knob to enter the setting.
4. Rotate the Tuning control knob to select the
desired year and press the Tuning control knob to
confirm the setting. Then rotate the Tuning control
knob to select the desired month, and press the
Tuning control knob to confirm the setting. Then
rotate the Tuning control knob to select the desired
date and press the Tuning control knob to confirm
the setting.
Setting the alarm clock
Your radio has two alarms which can each be set to wake
you to AM/FM radio or buzzer alarm. The alarms may be
set while the unit is in standby mode or while playing.
Setting radio alarm time
1. Press and hold the radio alarm button , the radio
alarm symbol and the display hour will flash along with a beep.
2. While the radio alarm symbol is flashing,
rotate Tuning control knob to select the hour and press
Tuning control knob again to confirm hour setting. Then
rotate the Tuning control knob to select the minute and
press Tuning control knob to confirm minute setting.
3. Rotate the Tuning control knob and the display will
show the frequency options for the alarm.
The alarm options are as follows:
ONCE The alarm will sound
once
DAILY The alarm will sound
everyday
WEEKDAYS The alarm will sound only
on weekdays
WEEKENDS The alarm will sound only
at weekends
Press the Tuning control knob to confirm the setting.
4. Rotate Tuning control knob to select the band
(FM/AM) and press Tuning control knob again to
confirm the setting.
5. Rotate Tuning control knob to select <LAST
LISTENED> or <PRESET NO.> and press Tuning
control knob again to confirm the setting.
6. Rotate Tuning control knob to select the
desired volume and press Tuning control knob to con-
firm the volume. Radio alarm setting is now completed.
NOTE: If new radio alarm station is not selected, the
radio will select the last alarm station.
Setting HWS (Humane Wake System)
buzzer alarm
A beep tone will activate when selecting the HWS buzzer alarm.
The alarm beep starts to ring and it becomes quicker
as the time elapses. The alarm beep continues to ring
for one minute and stops. After one minute silence, the
alarm beep resume ringing. The alarm beep repeats
this cycle until you press the Power button .
NOTE:
The buzzer alarm can be set when the radio
is turned off.
1. Press and hold the buzzer alarm button , the
symbol and the display hour will flash along with a beep.
2. While the buzzer alarm symbol is flashing,
rotate Tuning control knob to select the hour and press
Tuning control knob again to confirm hour setting. Then
rotate the Tuning control knob to select the minute and
press Tuning control knob to confirm minute setting.