background image

6 ENGLISH

2.

Attach the flat nozzle or extension nozzle to the

adapter pipe, and then turn it to lock it into place.

3

1

2

►  

1.

 Flat nozzle 

2.

 Extension nozzle 

3.

 Adapter pipe

Attaching the shoulder strap

Optional accessory

CAUTION:

 

Be sure to attach the hooks of 

the shoulder strap to the machine securely.

 If the 

hooks are attached incompletely, they may come off 

and cause an injury.

CAUTION:

 

Be sure to use the shoulder strap 

dedicated to this machine.

 Using other shoulder 

strap may cause an injury.

Attach the hooks of the shoulder strap to the machine 

as shown in the figure.

1

1

►  

1.

 Hook

You can also attach the shoulder strap to the machine 

as shown in the figure by attaching one end of the 

shoulder strap to the buckle of the shoulder strap.

1

►  

1.

 Buckle

FUNCTIONAL 

DESCRIPTION

CAUTION:

 

Always be sure that the machine is 

switched off and the battery cartridge is removed 

before adjusting or checking function on the 

machine.

Installing or removing battery 

cartridge

CAUTION:

 

Always switch off the machine 

before installing or removing of the battery 

cartridge.

CAUTION:

 

Hold the machine and the battery 

cartridge firmly when installing or removing bat

-

tery cartridge.

 Failure to hold the machine and the 

battery cartridge firmly may cause them to slip off 

your hands and result in damage to the machine and 

battery cartridge and a personal injury.

CAUTION:

 

Always install the battery cartridge 

fully until the red indicator cannot be seen.

 If not, 

it may accidentally fall out of the machine, causing 

injury to you or someone around you.

CAUTION:

 

Do not install the battery cartridge 

forcibly.

 If the cartridge does not slide in easily, it is 

not being inserted correctly.

Summary of Contents for XBU03Z











Reviews: