background image

4 ENGLISH

10.

Have servicing performed by a qualified repair 

person using only identical replacement parts.

 

This will ensure that the safety of the product is 

maintained.

11.

Do not modify or attempt to repair the machine

or the battery pack except as indicated in the 

instructions for use and care.

Electrical and battery safety

1.

Do not dispose of the battery(ies) in a fire.

 

The cell may explode. Check with local codes for 

possible special disposal instructions.

2.

Do not open or mutilate the battery(ies).

Released electrolyte is corrosive and may cause 

damage to the eyes or skin. It may be toxic if 

swallowed.

3.

Do not charge battery in rain, or in wet 

locations.

4.

Do not charge the battery outdoors.

5.

Do not handle charger, including charger plug, 

and charger terminals with wet hands. 

Service

1.

Have your power tool serviced by a qualified 

repair person using only identical replacement 

parts.

 This will ensure that the safety of the power

tool is maintained.

2.

Never service damaged battery packs.

 Service

of battery packs should only be performed by the 

manufacturer or authorized service providers.

SAVE THESE 

INSTRUCTIONS.

WARNING:

 

DO NOT let comfort or familiarity 

with product (gained from repeated use) replace 

strict adherence to safety rules for the subject 

product.
MISUSE or failure to follow the safety rules stated 

in this instruction manual may cause serious 

personal injury.

WARNING:

 

Use of this product can create 

dust containing chemicals which may cause 

respiratory or other illnesses. Some examples of 

these chemicals are compounds found in pesti-

cides, insecticides, fertilizers and herbicides.
Your risk from these exposures varies, depend-

ing on how often you do this type of work. To 

reduce your exposure to these chemicals: work 

in a well ventilated area, and work with approved 

safety equipment, such as those dust masks that 

are specially designed to filter out microscopic 

particles.

Symbols

The followings show the symbols used for tool.

volts

direct current

Important safety instructions for 

battery cartridge

1.

Before using battery cartridge, read all instruc-

tions and cautionary markings on (1) battery 

charger, (2) battery, and (3) product using battery.

2.

Do not disassemble battery cartridge.

3.

If operating time has become excessively

shorter, stop operating immediately. It may 

result in a risk of overheating, possible burns 

and even an explosion.

4.

If electrolyte gets into your eyes, rinse them out 

with clear water and seek medical attention right

away. It may result in loss of your eyesight.

5. 

Do not short the battery cartridge:

(1) 

Do not touch the terminals with any con-

ductive material.

(2) 

Avoid storing battery cartridge in a con-

tainer with other metal objects such as 

nails, coins, etc.

(3)

Do not expose battery cartridge to water

or rain.

A battery short can cause a large current 

flow, overheating, possible burns and even a 

breakdown.

6.

Do not store the tool and battery cartridge in 

locations where the temperature may reach or 

exceed 50 °C (122 °F).

7.

Do not incinerate the battery cartridge even if 

it is severely damaged or is completely worn 

out. The battery cartridge can explode in a fire.

8.

Be careful not to drop or strike battery.

9.

Do not use a damaged battery.

10.

The contained lithium-ion batteries are subject to 

the Dangerous Goods Legislation requirements. 

For commercial transports e.g. by third parties, 

forwarding agents, special requirement on pack-

aging and labeling must be observed. 

For preparation of the item being shipped, consult-

ing an expert for hazardous material is required. 

Please also observe possibly more detailed 

national regulations. 

Tape or mask off open contacts and pack up the 

battery in such a manner that it cannot move 

around in the packaging.

11.

When disposing the battery cartridge, remove 

it from the tool and dispose of it in a safe 

place. Follow your local regulations relating to 

disposal of battery.

12.

Use the batteries only with the products 

specified by Makita.

 Installing the batteries to

non-compliant products may result in a fire, exces

-

sive heat, explosion, or leak of electrolyte.

13.

If the tool is not used for a long period of time, 

the battery must be removed from the tool.

SAVE THESE INSTRUCTIONS.

CAUTION:

 

Only use genuine Makita batteries.

 

Use of non-genuine Makita batteries, or batteries that 

have been altered, may result in the battery bursting 

causing fires, personal injury and damage. It will 

also void the Makita warranty for the Makita tool and 

charger.

Summary of Contents for XBU03Z











Reviews: