11 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model:
UR012G
Handle type
Bike handle
No load speed
(at each rotation speed level)
Cutter blade / Plastic blade
3: 0 - 6,800 min
-1
2: 0 - 5,000 min
-1
1: 0 - 3,500 min
-1
Nylon cutting head
3: 0 - 5,000 min
-1
2: 0 - 4,200 min
-1
1: 0 - 3,500 min
-1
Overall length
(without cutting tool)
1,790 mm
Nylon cord diameter
2.4 - 3.0 mm
Applicable cutting tool and
cutting diameter
2-tooth blade
(P/N 195624-6)
305 mm
3-tooth blade
(P/N 195300-2)
305 mm
4-tooth blade
(P/N 196895-8)
255 mm
8-tooth blade
(P/N B-14146)
255 mm
Chisel blade
(P/N 199872-9)
225 mm
Shredder blade
(P/N 199874-5)
270 mm
Nylon cutting head
(P/N 199884-2)
480 mm
Plastic blade
(P/N 199868-0)
305 mm
Rated voltage
D.C. 72 V - 80 V max
Net weight
8.0 - 9.3 kg
Protection degree
IPX4
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications may differ from country to country.
•
The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi
-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
BL4020 / BL4025 / BL4040 / BL4050F*
* : Recommended battery
Charger
DC40RA / DC40RB / DC40RC
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above.
Use of any other battery cartridges
and chargers may cause injury and/or fire.
Summary of Contents for UR012GZ04
