R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -5. Switch lever B, Front grip and Protector
P
7
/
7
DISASSEMBLING
Fig. 19
ASSEMBLING
Refer to Fig. 10.
1) When separating Front grip from Switch lever B;
- hook one end of Compression spring 9 with the protrusion of Front grip.
- hook the tab of Switch lever B with the edge of Front grip. And hook
the other end of Compression spring 9 with the protrusion of Switch lever B.
(Fig. 19)
2) Hook Front grip, Switch lever B and Protector complete with Housing set,
and then tighten two M5x30 Pan head screws to assemble Front grip,
Switch lever B and Protector complete to Housing set. (Fig. 10)
3) Set Shear blade ass’y in place. Refer to the clause of [3]-2.
protrusion of
Front grip
tab of Switch
lever B
Compression
spring 9
protrusion of
Switch lever B
C
ircuit diagram
White
Color index of lead wires' sheath
Black
Brown is used
for some countries.
Terminal block
Terminal block
Blue is used
for some countries.
Noise
suppressor
(if used)
Field
Fig. D-1
Fig. D-2
Noise suppressor
(if used)
Brush holder
Lead wires have to be insert into the bottom
of Lead wire holder here.
Lead wires have to be insert into
the bottom of Lead wire holder here.
Connect Receptacles for
Motor so that their lead
wires face Housing L side.
W
iring diagram
