PRODUCT
C
ONCEPT AND MAIN APPLICATIONS
P 1/ 12
S
pecification
S
tandard equipment
O
ptional accessories
Note:
The standard equipment for the tool shown above may vary by country.
Model No.
Description
MT80A, MT80B
Hammer Drills 10mm (3/8"), 16mm (5/8")
Models MT80A/ MT80B have been developed as maktec brand
hammer drills 10mm (3/8")/ 16mm (5/8"), mainly for the emerging
countries.
New maktec design is employed to eliminate white printing and
polygonal line from maktec logo/ elastomer from handle for the cost
effectiveness.
Depth gauge
230
240
50/60
50/60
2.3
2.2
500
500
250
250
350
220
50/60
2.4
500
250
350
350
Continuous Rating (W)
Voltage (V)
Cycle (Hz)
Input
Output
Max. Output (W)
Current (A)
Dimensions: mm ( " )
Width (W)
Height (H)
Length (L)
262 (10-3/8)
MT80B
254 (10)
MT80A
196 (7-3/4)
70 (2-3/4)
Chuck capacity: mm (")
Chuck type
Reverse switch
Impacts per min.: min.
ˉ
¹= ipm
Capacities: mm (")
Steel
Concrete
Wood
Protection against electric shock
Power supply cord: m (ft)
Weight according to
EPTA-Procedure 01/2003
*
: kg (lbs)
0 - 2,900
Model No.
MT80B
0 - 43,500
Keyed
1.5 - 13 (1/16 - 1/2)
16 (5/8)
13 (1/2)
20 (13/16)
Yes
Double insulation
1.7 (3.7)
2.0 (6.6)
Variable speed control by trigger
Yes
0 - 2,900
MT80A
0 - 43,500
Keyed
1.5 - 10 (1/16 - 3/8)
10 (3/8)
10 (3/8)
20 (13/16)
Yes
Double insulation
1.6 (3.4)
2.0 (6.6)
Yes
*
with Side grip
Chuck key S10 (MT80A) ........................................ 1
Chuck key S13 (MT80B) ........................................ 1
Key holder 10 .......................................................... 1 (for some countries only)
Side grip .................................................................. 1
Plastic carrying case (MT80B) ............................... 1 (for “K model” only)
No load speed: min.
ˉ
¹=rpm
Specification
T
ECHNICAL INFORMATION
W
L
H
