8
Grinding and sanding operation
15°
001651
Hold the tool firmly. Turn the tool on and then apply the
wheel or disc to the workpiece. In general, keep the edge
of the wheel or disc at an angle of about 15° to the
workpiece surface. During the break-in period with a new
wheel, do not work the tool in the B direction or it will cut
into the workpiece. Once the edge of the wheel has been
rounded off by use, the wheel may be worked in both A
and B directions.
Operation with abrasive cut-off / diamond
wheel (optional accessory)
1
2
3
4
010855
The direction for mounting the lock nut and the inner
flange varies by wheel thickness. Refer to the table
below.
Abrasive cut-off wheel
Diamond wheel
Thickness: Less than 4 mm (
5
/32")
Thickness: 4 mm (
5
/32") or more
1
6 mm (
5
/8")
20 mm (
1
3/
1
6")
22.23 mm (7/8")
Abrasive cut-off wheel
Diamond wheel
Thickness: Less than 4 mm (
5
/32")
Thickness: 4 mm (
5
/32") or more
Thickness: Less than 4 mm (
5
/32")
Thickness: 4 mm (
5
/32") or more
Thickness: Less than 4 mm (
5
/32")
Thickness: 4 mm (
5
/32") or more
22.23 mm (7/8")
22.23 mm (7/8")
22.23 mm (7/8")
1
6 mm (
5
/8")
20 mm (
1
3/
1
6")
1
2
3
1
4
3
1
. Lock nut 2. Abrasive cut-off wheel 3. Inner flange 4. Diamond wheel
1
00 mm (4")
115
mm (4 -
1
/2") /
1
2
5
mm (
5
")
1
. Lock nut 2. Abrasive cut-off wheel 3. Inner flange 4. Diamond wheel
1
2
3
1
4
3
010848
1. Lock nut
2. Abrasive cut-off
wheel/diamond
wheel
3. Inner flange
4. Wheel guard for
abrasive cut-off
wheel/diamond
wheel
