P 2 / 6
R
epair
[2] LUBRICATION
Apply #120 machine oil or the like to the following portions designated with the black triangle to protect
parts and product from unusual abrasion.
[1] NECESSARY REPAIRING TOOLS
CAUTION: Remove the planer blade from the machine for safety before repair/ maintenance !
Code No.
1R045
Description
Gear extractor (large)
Removing pulley of armature and that of drum
Wrench 17
Lock nut wrench for angle grinder
Locking drum, when replacing V-pulley
Removing bearing box
Removing poly V belt
1R284
Round bar for arbor 10-50
Removing ball bearing from armature and drum
1R269
Bearing extractor (small)
Removing retaining ring S-7 from drum
1R291
Retaining ring R and S pliers
Use for
[3] DISASSEMBLY/ASSEMBLY
[3] -1. Replacing Poly V-Belt
DISASSEMBLING
1R281
Round Bar for Arbor 7-50
Removing drum rear shaft
Mounting ball bearing 6201ZZ to drum shaft
1R033
Bearing Setting Plate 10.2
Fig. 1
Item No. Part description
Portion to lubricate
Main frame
48
Front base
Outside surface of Cylinder
that contacts Main frame.
See Fig. 1 illustrated to right.
ASSEMBLING
1) Remove Belt cover.
2) When replacing parts such as armature or drum, you will
probably reuse the Poly V-belt once removed.
In this case, remove the belt by turning either of the
V pulleys in the direction of the arrow while lifting up the
belt with a Lock nut wrench of a Makita grinder. (Fig. 2)
When you replace the Poly V-belt with new one, remove
simply by cutting the worn belt with cutting pliers.
1) Remove Belt cover.
2) Install Poly V-belt 5-285 securely on V pulley 5-23.5L,
and then install the belt on V pulley 5-32.4 while turning
V pulley 5-32.4 in the direction of the arrow. (F3)
Note: It will help you easily install the Poly V-belt
to follow the instruction described below;
In order not to allow the belt to be out of the
V-grooves on the two V pulleys, while turning
V pulley 5-32.4, press the half of the belt opposite
to the other half being installed as illustrated
in Fig. 3.
Lock nut
wrench
Poly V-belt
5-285
V pulley 5-32.4
Fig. 2
Fig. 3
V pulley 5-23.5L
Bracket complete
Press the half of the belt
against Bracket complete.
