P 4/ 12
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -2. Helical gear 39, Ball bearing 6002LLB
DISASSEMBLING
(1) Remove Drill chuck.
Fig. 2A
/
2B
(2) Remove Spindle section from the machine.
Fig. 3
Fig. 3
3. Shift Change lever to Hammer
drill mode
1. Shift Change lever to Drill mode.
2. Remove Housing (R) by loosening seven 4x18 Tapping screws.
4. Hold Spindle and Change lever by hand, then lift up Spindle
and Change lever while turning them counterclockwise
viewing them from Drill chuck side.
5. Pull off the Spindle section (Spindle, Ball bearing 6002LLB,
Compression spring 16) from Cam holder complete.
Change lever
Cam holder complete
Housing (R)
4x18 Tapping screw
(7 pcs.)
Change lever
Spindle
Change
lever
Spindle section
