Switch
W
iring diagram
P 10/ 12
Wiring in Housing set (L)
Areas where suppression of radio interference is required
Setting of Brush holders
Fig. D-2
Brush holder
Rib A
Rib B
Housing (L)
Put Brush holders as drawn below so that the Lead wires
can be connected to them
approaching from rear side
.
Switch
Change lever side
Window of
Brush holder
Brush holder
Brush holder
While facing the window of Brush holder
to Housing (L) side, put it in the position
of Change lever side.
While facing the window of Brush holder
to Housing (R) side, put it in the position
of Switch side.
Power supply cord
Noise suppressor
Put Choke coil (purple) in the position
shown below.
Put Choke coil (orange)
in the position
shown in the right.
Fix Field lead wires (black)
with this Lead wire holder.
Put Field lead wires and
Power supply cord (brown
or black) between Rib A
and Rib B.
Put Noise suppressor
in the position
shown in the right.
Put Field lead wires (black, white)
under Brush holder.
