R
epair
P 8 / 13
8) Assembling front cover
1. Front cover has to be assembled to turn base as illustrated in Fig. 9A.
Turn base
Front co
ver
Front cover
Turn base
Fig. 9A
The surfaces for assembling kerf boards have to
be flat.
Fig. 9
< 4 > Disassembling motor section
1. Down the motor section to the lowest position and
insert 2 pcs. of round bars into the holes of blade case
in order to block compression spring 28 and
spring holder in the blade case.
Round bars
diameter : 4mm or 5mm
length : longer than 60mmn
Hex bolt M10 x 105
Link plate
2. Disassemble link plate from arm
by loosen hex socket hd. bolt M6 x 20
as illustrated in Fig. 10A.
Fig. 10
Fig. 10A
Hex socket head
bolt M6 x 20