R
epair
P 5 / 13
< 3 > Assembling slide section
1) Pass slide pipe through bearing 30 (integrated part of turn base) as illustrated in Fig 3A.
Assemble rubber washer and lock ring 30 to slide pipe as illustrated in Fig. 3B.
Bearing 30
Bearing 30
Rubber washer
Lock ring 30
Fig. 3A
Fig. 3B
< Note > When rod is mounted to lock ring 30, the flat portion of lock ring 30
has to be faced as illustrated in Fig. 4B.
2) Insert rod to which needle bearings 808 and 708 are assembled in advance, into the hole of slide pipe
through the hole of lock ring 30 as illustrated in Fig. 4B.
Rod
Needle bearing 808
Needle bearing 708
Fig. 4A
Fig. 4B
Front cover
View from front cover side
Needle bearing 808
Needle bearing 708
Stop ring
Rod
Lock ring 30
Sliding pipe
Flat portion
Not screw hex socket head
bolt M5 x 6 in this process.
3) Assemble slide guide plate, slide guide support and slide guide by screwing hex socket head bolt M5 x 40
as illustrated in Fig. 5A and Fig. 5B.
Hex socket
hd. bolt M5 x 40
Slide guide plate
Slide guide support
Slide guide
Front cover
The hex socket hd. bolts have to be fastened in
order of any of the above arrows. Not fasten them in random order.
Fig. 5A
Assembled parts for sliding the
slide pipe
View from front cover side
Turn base
Fig. 5B