W
iring diagram
P 19 /20
Clamp plate
Line filter
Field lead wire
(orange)
Soft start lead wire
(Purple)
Field lead wire
(orange)
Soft start lead wire
(Purple)
Rib A
Before securing clamp plate,
put the lead wires
between rib A and B.
When line filter is used, pass the following
lead wires through line filter.
* Field lead wire
(orange)
* Soft start lead wire
(Purple)
Rib B
Under clamp plate
In switch box
Inner wall
Noise suppressor
Punched hole
for lead wires
Relay
Rib B
Rib A
Hole for
pipe 9-126
Be careful, not to pinch the lead wires of light circuit
between rib B and relay, when fluorescent job light is installed.
Boss
Put the lead wires, connected to relay
through punched hole, between boss
and rib A.
Put the insulated connectors into
the space between relay and inner wall,
or
push into the punched hole.
Put noise suppressor
into the space between
relay and inner wall,
or
push it into the punched
hole, when it is used.
Switch button
When putting lead wires onto relay,
do not put them on this area.
Put line filter in the space illustrated
above. (exclusively for low voltage
in Great Britain)
