![background image](http://html1.mh-extra.com/html/makita/lh1040/lh1040_technical-information_4259470012.webp)
R
epair
P 12 / 20
<12> Removing turn base
<13> Mounting turn base
<14> Angle adjustment of saw blade
3. Remove hex lock nut M8x13 and flat washer 8. Now turn base can be removed from base. See Fig.10-3.
1. Mount turn base and flat washer 8, and tighten hex lock nut M8x13 with socket wrench 13.
The hex lock nut M8x13 has to be so tightened, that turn base can move without wobbling.
2 Take the reverse step of disassembling after the above process.
1. Adjusting to 90° to turn base,
While applying 1R208 "
90-degree Set Square", turn Hex bolt M8x28 of motor housing side,
until both saw blade and turn base contact the jig closely. See Fig.11-1.
2.
Adjusting to 45° to turn base,
While applying 1R207 "
45-degree Set Square", turn Hex bolt M8x28 of saw blade side,
until both saw blade and turn base contact the jig closely. See Fig.11-2.
Hex lock nut M8x13
Socket wrench 13
which comes
with the product.
Flat washer 8
Turn base
Base
Fig.10-3
Hex bolt M8x28
of motor housing side
Hex bolt M8x28
of saw blade side
1R208
90-degree Set Square
1R209
45-degree Set Square
Fig.11-1
Fig.11-2
Turn base
Turn base