Makita LD100P, Instruction Manual, Page: 33 / 410

8 Operation
Makita LD100P
D
GB
F
I
E
NL
P
N
FIN
DK
S
TR
CZ
SK
PL
SLO
HR
H
GR
RUS
LV
EST
LT
ROK
CN
Continuous laser ( )
You can switch the continuous laser function on or
off.
With the continuous laser function set on, each press
of the button triggers a measurement. The laser
automatically switches off after 15 minutes.
Measuring with the tripod ( )
The reference must be appropriately adjusted in
order to be able to take correct measurements with
a tripod. To do this select the
TRIPOD
symbol in this
menu item. You can switch the reference on the
tripod on or off. The setting can be seen on the
display .
Display - keypad illumination ( )
Automatic illumination of the display and the keypad
can be switched on or off.
Reset - returning the instrument to
the factory settings (
)
The instrument has a
RESET
function. When you
select the menu function
RESET
and confirm, the
instrument defaults to the factory settings.
A reset returns the following values to their factory
settings:
• Reference (rear)
• Display illumination (ON)
• Beep (ON)
• Unit (m(mm))
• Stack and memory are erased
)
All customised settings and stored values are
also lost.
Operation
Switching on and off
Switches on the instrument and laser. The
display shows the battery symbol until the
next button is pressed.
Pressing this button for longer switches the
instrument off.
The instrument switches off automatically
after six minutes of inactivity.
CLEAR button
The last action is cancelled. While making area or
volume measurements, each single measurement can
be deleted and remeasured in series.
TRIPOD