Makita HRU01, Instruction Manual

Page: 8 / 44

8
damage to the tool or battery cartridge.
If the tool becomes overloaded but not locked up, a
protector is provided to reduce the revolutions to protect
the motor. In this case the two indicator lamps described
in the table below do not light or blink.
All other protection functions can be identified by the
indicator lights described in the table below.
1
012967
Statu s
B li n ki ng
Li ght i ng O n
- Li ght i ng O n
-
Battery power ha s b een
near l y u s ed up .
Battery protector is
s hutt i ng o ff the power -
b attery power ha s b een
u s ed up .
-
-
A ct i on to b e ta k en
R ep l ace the b attery w i th f u ll y charged one .
R ep l ace the b attery w i th f u ll y charged one .
R e s t the e q u i pment f or a wh il e .
B li n ki ng
Ov er l oad protector is s hutt i ng
o ff the power - the motor wa s
l oc k ed .
B li n ki ng B li n ki ng
El ectr i c or e l ectron i c
ma lf unct i on
Ask your l oca l author iz ed s er vi ce center f or
repa i r s.
Ov erheat protector is s hutt i ng
o ff the power - o v erheat i ng .
R e l ea s e the s w i tch tr i gger and remo v e the
cau s e o f the motor l oc k or o v er l oad . If the
cutt i ng too l is l oc k ed b y entang li ng weed s or
the lik e , a l way s remo v e the b attery cartr i dge
b e f ore c l ear i ng i t .
010823
Nylon cutting head
NOTICE:
•
Do not attempt to bump feed the head while the tool
is operating at a high RPM. Bump feeding at a high
RPM may cause damage to the nylon cutting head.
•
The bump feed will not operate properly if the head
is not rotating.
1
012863
The nylon cutting head is a dual string trimmer head
provided with a bump & feed mechanism.
To feed the nylon cord, bump the cutting head against the
ground while rotating at a low RPM. The nylon cord is
automatically cut to the proper length by the cutter on the
protector.
NOTE:
•
If the nylon cord does not feed out while bumping
the head, rewind/replace the nylon cord by
following the procedures described under
"Maintenance."
•
Do not bump the tool to the concrete or asphalt
surface. Bumping to this kind of objects may cause
the tool damage.
1. Most effective
cutting area
1. Indicator lamps