![background image](http://html1.mh-extra.com/html/makita/hr5001c/hr5001c_technical-information_4262853011.webp)
To prevent abrasion and overheating, please apply the
MAKITA grease R No.00 at the positions shown below.
a. O ring of striker
b. Inside of ring 45
c. Inner of slide sleeve
d. Outside and gear of Spiral bevel gear 41
Teeth
Inside of
slide sleeve
Inside of
ring 45
Striker
O ring
Outside
Spiral bevel
gear 41
e. O ring of piston and rod hole
Rod hole
O ring
f. Outer surface of impact bolt
Outer surface
of impact bolt
g. Between spiral bevel gear 12 and the torque limiter complete
Between Spiral
bevel gear 12 and
torque limiter complete
h. Lip of Oil seal 14 and oil seal 48
Lip
i. Needle bearing(Gear housing, Helical gear 20 complete)
Helical gear 20 complete
j. Each gear teeth
Needle bearing
Gear housing
Needle bearing
Lubication