R
epair
[1] NECESSARY REPAIRING TOOLS
CAUTION: Repair the machine in accordance with “Instruction manual” or “Safety instructions”.
P 3/ 25
Code No.
Description
Use for
1R003
Retaining ring S pliers ST-2N removing Ring spring 14
1R032
1R034
1R045
1R164
Ring spring setting tool A
mounting Oil seal 25 to Gear housing complete
removing Oil seal 25 from Gear housing complete
1R212
1R228
1R232
1R252
1R258
1R269
1R273
1R281
1R369
1R388
Tip for Retaining ring pliers
1/4” Hex. shank bit for M4
removing / assembling M4 Hex socket head bolt
Pipe 30
Round bar for arbor 30-100
V block
supporting Gear housing complete when assembling Oil seal 25
Bearing extractor
removing Ball bearings 6000LLB, 627DDW
Ring spring 26 setting tool B
Round bar for arbor 7-50
Jig for Spiro lock washer
Ring spring extractor
Piston cylinder
Bearing setting plate 8.2
Bearing setting plate 12.2
Gear extractor (large)
removing/ assembling Spiro lock washer 30
removing Ring spring 28
assembling Ring spring 28 to inner groove of Tool holder complete
Note
: Prepare another Piston cylinder for repair.
Do not use Piston cylinder once removed from the machine.
removing/ assembling Cup sleeve and Ball bearing 6806LLU from/ to
Gear housing complete
Note
: Prepare another Inner housing complete for repair.
Do not use Inner housing complete once removed from the machine.
310345-1
141573-5
assembling Helical gear 26
removing Helical gear 26
1R288
Screwdriver magnetizer
removing Brush holder unit and two 3x12 tapping screws
assembling Cup sleeve and Ball bearing 6806LLU to Gear housing
complete
disassembling Helical gear 26
Inner housing complete