[3] DISASSEMBLY/ASSEMBLY
[3]-6. Swash bearing 10, Inner housing section (cont.)
ASSEMBLING
Fig. 31
Lock plate
Change plate
(7) Assemble Gear housing complete to Inner housing complete carefully in vertical direction as drawn in
Fig. 31
.
(8) Assemble Armature to Motor housing. Refer to
Fig. 9 of page 9
.
(9) Assemble Change lever as drawn in
Fig. 6 of page 7
.
(10) Assemble Bit holder section. Refer to
Fig. 4 of page 6
.
Hold Lock plate by finger
through the hole of Change lever.
Lock plate is easily fallen off from Gear housing
complete as drawn below, and therefore, support
Lock plate by finger through the hole of
Change lever insertion as the right picture.
hole of Change
lever insertion.
P 19/ 25
R
epair
Be careful not to touch the edge of
Gear housing complete with Change plates.
Otherwise, they will be easily fallen off
from Clutch cam.
