background image

11 ENGLISH

NOTICE:

 

Never use “rotation with hammering” 

when the drill chuck is installed on the tool.

 The 

drill chuck may be damaged. 

Also, the drill chuck will come off when reversing the 

tool.

NOTICE:

 

Pressing excessively on the tool will 

not speed up the drilling.

 In fact, this excessive 

pressure will only serve to damage the tip of your drill 

bit, decrease the tool performance and shorten the 

service life of the tool.

Set the action mode changing knob to the   symbol.

Attach the chuck adapter to a keyless drill chuck to 

which 1/2"-20 size screw can be installed, and then 

install them to the tool. When installing it, refer to the 

section “Installing or removing drill bit”.

1
2

►    

1.

 Drill chuck assembly 

2.

 Chuck adapter

Blow-out bulb

Optional accessory

After drilling the hole, use the blow-out bulb to clean the 

dust out of the hole.

MAINTENANCE

CAUTION:

 

Always be sure that the tool is 

switched off and the battery cartridge is removed 

before attempting to perform inspection or 

maintenance.

NOTICE:

 

Never use gasoline, benzine, thinner, 

alcohol or the like. Discoloration, deformation or 

cracks may result.

To maintain product SAFETY and RELIABILITY, 

repairs, any other maintenance or adjustment should 

be performed by Makita Authorized or Factory Service 

Centers, always using Makita replacement parts.

OPTIONAL 

ACCESSORIES

CAUTION:

 

These accessories or attachments 

are recommended for use with your Makita tool 

specified in this manual.

 The use of any other 

accessories or attachments might present a risk of 

injury to persons. Only use accessory or attachment 

for its stated purpose.

If you need any assistance for more details regard-

ing these accessories, ask your local Makita Service 

Center.

• 

Carbide-tipped drill bits (SDS-Plus carbide-tipped 

bits)

• 

Chuck adapter

• 

Keyless drill chuck

• 

Bit grease

• 

Depth gauge

• 

Blow-out bulb

• 

Dust cup

• 

Dust cup set

• 

Grip base set

• 

Safety goggles

• 

Hook

• 

Makita genuine battery and charger

• 

Plastic carrying case

NOTE:

 Some items in the list may be included in the 

tool package as standard accessories. They may 

differ from country to country.

Summary of Contents for HR140DWMJ













Reviews: