![background image](http://html2.mh-extra.com/html/makita/hm0871c/hm0871c_instruction-manual_3965064004.webp)
4 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model
HM0871C
HM0870C
Blows per minute
1,100 - 2,650 min
-1
Overall length
466 mm
449 mm
Net weight
5.6 kg
5.1 kg
Safety class
II
• Due to our continuing programme of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for chiselling work in concrete,
brick, stone and asphalt as well as for driving and com
-
pacting with appropriate accessories.
Power supply
The tool should be connected only to a power supply
of the same voltage as indicated on the nameplate,
and can only be operated on single-phase AC supply.
They are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
Noise
The typical A-weighted noise level determined accord-
ing to EN60745:
For Model HM0871C
Sound pressure level (L
pA
) : 86 dB (A)
Sound power level (L
WA
) : 97 dB (A)
Uncertainty (K) : 3 dB (A)
For Model HM0870C
Sound pressure level (L
pA
) : 87 dB (A)
Sound power level (L
WA
) : 98 dB (A)
Uncertainty (K) : 3 dB (A)
NOTE:
The declared noise emission value(s) has
been measured in accordance with a standard test
method and may be used for comparing one tool with
another.
NOTE:
The declared noise emission value(s)
may also be used in a preliminary assessment of
exposure.
WARNING:
Wear ear protection.
WARNING:
The noise emission during actual
use of the power tool can differ from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING:
Be sure to identify safety mea
-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
Vibration
The vibration total value (tri-axial vector sum) deter
-
mined according to EN60745:
For Model HM0871C
Work mode : chiseling function with side handle
Vibration emission (a
h,CHeq
) : 8.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
Work mode : chiseling function with side grip
Vibration emission (a
h,CHeq
) : 8.0 m/s
2
Uncertainty (K) : 2.0 m/s
2
For Model HM0870C
Work mode : chiseling function with side handle
Vibration emission (a
h,CHeq
) : 11.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
Work mode : chiseling function with side grip
Vibration emission (a
h,CHeq
) : 11.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
NOTE:
The declared vibration total value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
NOTE:
The declared vibration total value(s) may also
be used in a preliminary assessment of exposure.
WARNING:
The vibration emission during
actual use of the power tool can differ from the
declared value(s) depending on the ways in which
the tool is used especially what kind of workpiece
is processed.
WARNING:
Be sure to identify safety mea
-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.
Summary of Contents for HM0871C
Page 2: ...1 ON OFF 1 1 2 1 1 2 1 2 1 Fig 1 Fig 2 Fig 3 Fig 4 Fig 5 Fig 6 Fig 7 Fig 8 2...
Page 3: ...1 1 Fig 9 Fig 10 Fig 11 Fig 12 Fig 13 3...
Page 10: ...10 1 5 1 5 HM0871C 3 1 2 8 4 1 D 5 1 D 2 360 6 1 2 7 1 8 9 1 10 1 11 12 12 13...
Page 11: ...11 Makita Makita SDS MAX SDS MAX SDS MAX SDS MAX...