![background image](http://html1.mh-extra.com/html/makita/hm0860c/hm0860c_technical-information_4123759008.webp)
P 8 /14
<10> Disassembling/reassembling Cylinder Section
<10>-1. Disassembling Cylinder Section
(1) Separate Barrel from Crank housing comp. by removing M6x30 Hex. socket head bolts (4 pcs.) as in Fig. 15.
(2) Cylinder section can be removed from Barrel by hitting the end of Barrel with wooden or plastic hammer
as illustrated in Fig. 16.
(3) Remove Cylinder guide by removing Ring spring 34 from Cylinder
using Retaining ring S pliers (1R003). (Fig. 17)
(4) Remove Compression spring 37 and Ring 36 by removing Ring spring 34 from Cylinder using
Retaining ring S pliers (1R003). (Fig. 18)
M6x30 hex. socket
head bolts
Crank housing complete
Barrel
Fig. 15
Fig. 16
Fig. 17
Retaining ring S pliers
ST-2N (1R003)
Cylinder guide
Ring spring 34
Fig. 18
Retaining ring S pliers
ST-2N (1R003)
Ring 36
Compression spring 37
Ring spring 34
(5) Take Rubber ring 20 and Cup washer 23 out of Guide ring.
Now Guide ring and Slide sleeve can be removed from Cylinder. (Fig. 19)
Fig. 19
Rubber ring 20
Cup washer 23
Guide ring
Guide ring
Slide sleeve
Cylinder
Plastic (or wooden)
hammer
Cylinder section