18 ENGLISH
Tilting the circular saw blade to the
right
1.
Rotate the knob on the slide pole
counterclockwise.
2.
Hold the handle and tilt the carriage to the left
slightly.
3.
Tilt the carriage to the right while pressing the
releasing button for right side bevel angle.
4.
Align the pointer with your desired angle on the
bevel angle scale.
5.
Tighten the knob clockwise to secure the carriage
arm.
2
3
4
1
►
1.
Knob
2.
Handle
3.
Releasing button for right side
bevel angle
4.
Bevel angle scale
Tilting the circular saw blade using
positive stop function
This miter saw employs positive stop function. You can
set 22.5° and 33.9° angle to both right and left quickly.
1.
Rotate the knob on the slide pole
counterclockwise.
2.
Tilt the carriage close to your desired positive stop
angle while raising the latch lever up.
3.
Set the latch lever in a horizontal position.
4.
Tilt the carriage at your desired positive stop angle
until it is secured.
5.
To change the angle, pull the latch lever towards
the front of the tool, and then re-tilt the carriage.
6.
Tighten the knob clockwise to secure the carriage
arm.
1
2
►
1.
Knob
2.
Latch lever
