2 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model:
GSL03
Blade diameter
255 mm (10″)
Hole diameter
15.88 mm (5/8″)
Max. kerf thickness of the saw blade
3.2 mm (1/8″)
Max. miter angle
Right 60°, Left 60°
Max. bevel angle
Right 48°, Left 48°
No load speed (RPM)
3,600 /min
Dimensions (L x W x H)
805 mm x 644 mm x 660 mm
(31-3/4" x 25-3/8" x 26")
Rated voltage
D.C. 36 V - 40 V max
Net weight
26.6 - 27.2 kg
(58.6 - 60.0 lbs)
Cutting capacities (H x W)
Miter angle
Bevel angle
45° (left)
0°
45° (right)
0°
47 mm x 305 mm
(1-7/8″ x 12″)
61 mm x 279 mm
(2-3/8″ x 11″)
71 mm x 305 mm
(2-13/16″ x 12″)
91 mm x 279 mm
(3-5/8″ x 11″)
29 mm x 305 mm
(1-1/8″ x 12″)
43 mm x 279 mm
(1-11/16″ x 11″)
45° (right and left)
47 mm x 215 mm
(1-7/8″ x 8-1/2″)
61 mm x 197 mm
(2-3/8″ x 7-3/4″)
71 mm x 215 mm
(2-13/16″ x 8-1/2″)
91 mm x 197 mm
(3-5/8″ x 7-3/4″)
29 mm x 215 mm
(1-1/8″ x 8-1/2″)
43 mm x 197 mm
(1-11/16″ x 7-3/4″)
60° (right and left)
-
71 mm x 152 mm
(2-13/16″ x 6″)
91 mm x 139 mm
(3-5/8″ x 5-1/2″)
-
Cutting capacities for special cuttings
Type of cutting
Cutting capacity
Crown molding 45° type
(with crown molding stopper used)
168 mm
(6-5/8″)
Base board
(with horizontal vise used)
133 mm
(5-1/4″)
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications may differ from country to country.
•
The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi
-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
BL4025 / BL4040*
* : Recommended battery
Charger
DC40RA
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above.
Use of any other battery cartridges
and chargers may cause injury and/or fire.
