W
iring diagram
P
9
/
9
Fig. D-2
Fig. D-3
Fig. D-4
Fix Field lead wire (black)
with Lead wire holder.
Note
: Pull out Field lead wires (white, black)
so that they are tightened in Motor housing.
Route Field lead wire (white)
inside of the hook.
Wind Field lead wires (black, white)
around Line filter once,
Wiring of Field lead wires
Wiring on Switch
Wiring in Handle
Line filter*
Switch
Fix Lead wires of Power supply cord
into the groove.
Line filter and the slack portion of Field lead
wires have to be put in this place.
Note
: Be careful not to put them on Boss A.
groove
Boss A
Noise suppressor
**
*Line filter is not used for some countries.
**Noise suppressor is not used for some countries.
Receptacle
Connect Receptacles to Switch
as per the above direction.
Lead wire holder
Line filter
*
Put Power supply cord lead wires
between Rib and Switch.
Fix Field lead wires
with Lead wire holder.
Rib
