5-3 Large spiral bevel gear, Ball bearing 608ZZ/ 6905LLB / 6203DDW, SJS-II components for models GA7061,
GA9061, GA7061R, GA9061R (cont.)
5-3-2 Assembling (cont.)
Fig. 5-3-2-10
Fig. 5-3-2-8
[6] Set Bearing retainer 59 in place by
tightening Three M4x16 Pan head
screws.
Fig. 5-3-2-7
M4x16 Pan head
screw (3 pcs.)
Bearing retainer 59
[7] Receive Spindle complete with 1R030.
then press-fit the spindle into Large
spiral bevel gear with 1R029.
1R030
1R029
Spindle complete
Joint sleeve
Large spiral bevel
gear
Fig. 5-3-2-9
[8] Set O-ring 19 in place.
Note
: According to
Fig.4-2
in
page 5, apply the specific
lubricants in advance.
1R030
1R031
[9] Receive Spindle complete with 1R030.
then press-fit the spindle into Joint sleeve with 1R029.
Note
: Joint sleeve must be placed
as shown above..
Fig. 5-3-2-11
[11] Set C type plate 33 in place.
[10] Set C type plate 29 in place.
C type plate 29
C type plate 33
Fig. 5-3-2-12
17 / 25
