5-2
Large spiral bevel gear, Ball bearing 608ZZ/ 6905DDW for models GA7060, GA9060, GA7060R, GA9060R
5-2-1 Disassembling
Fig. 5-2-1-5
Fig. 5-2-1-2
Fig. 5-2-1-1
[1] Remove Ball bearing 608ZZ with 1R269.
1R269
Ball bearing 608ZZ
[2] Remove Ring spring 13 with 1R003, 1R212-A and 1R212-B.
Ring spring 13
1R212-A
1R212-B
1R003
[3] Put 1R032 on the step of Spindle complete.
Tap 1R032 carefully with the ram of an Arbor press
until the press-fitting between Spindle complete and
Large spiral bevel gear is loosened.
Note
: Avoid the projection of Bearing box
(Refer to
Fig. 5-1-1-16
in the previous page.)
Step of Spindle complete
(See the step [3].)
Ram of Arbor press
1R032
Arbor press table
Fig. 5-2-1-3
Fig. 5-2-1-4
[4] Press down Spindle complete with 1R286.
1R286
Spindle complete
Bearing box portion
Large spiral bevel gear
Spindle
complete
[5] Large spiral bevel gear, Bearing box portion
and Spindle complete are removed.
9 / 25
