P 7 / 9
R
epair
[3] -3. Shaft lock section
1) Remove Bearing box from Gear housing. (Fig. 9 on page 4)
2) Shoulder pin 5 can be removed from Gear housing using 1R268, 1R350 and plastic hammer as illustrated in Fig. 20.
DISASSEMBLING
Do the reverse of the disassembling steps.
Note: Do not reinstall removed Pin cap because removal of Shoulder pin 5 damages the inside surface of Pin cap.
Be sure to remove plastic dust of Pin cap from Shoulder pin 5 and to install it onto new Pin cap.
ASSEMBLING
Fig. 20
Pin cap
Gear housing
Shoulder pin 5
Compression spring 8
1R350
1R268
Pin cap
Gear housing
O ring 7
1R268
1R350