Repair Manual EA6100P / EA6101P
7
5
4
3
2
1
02 CLUTCH DRUM / CHAIN SPROCKET
Remove the sprocket guard, bar, and chain.
Release the chain brake.
Remove the circlip
5
with the universal
wrench.
Remove cup washer.
Sprocket and clutch drum with needle
bearing
Check the chain sprocket
4
for damage and
wear.
Important customer information:
Before installing a new saw chain, always
check the condition of the chain sprocket. A
worn chain sprocket will damage a new saw
chain, and must be replaced.
Check the clutch drum needle bearing for
wear and damage.
Assembly the bearing with multi-purpose high-
performance grease (944.360.000).
Check the inside and outside of the clutch
drum
3
for damage and wear.
Replace the clutch drum if annealing.
Note: Make sure to assemble with thrust
washer 1!
Note:
Always use a new circlip 5
(927.408.000)!
When assembling the clutch drum, make
sure that the lug of the oil pump drive 2 is
not positioned on the oil pump drive. When
inserting, turn the clutch drum slightly.