Makita EA6100P, Repair Manual, Page: 19 / 30

Repair Manual EA6100P / EA6101P 19
6 7
2
3
4
1
Removing the carburetor
CAUTION: Completely empty the fuel tank
before disassembling the carburetor!
Remove the cover and air  lter. Remove
the air  lter base, see Chap. 07 under
Combination switch .
Remove the pulse line 1 , fuel line (red) 2 and
primer suction line 4 from the carburetor.
CAUTION: There is fuel in the line. Catch
escaping fuel with a cloth.
Disengage the throttle cable 3 .
Pull the carburetor and air  ap off the
stationary bolts and then disengage the air
 ap linkage 6 from the carburetor.
Assembly
Place the insert 5 in the intake manifold if
necessary.
Engage the air
 ap linkage 6 , see illustration.
Note: Engage the air  ap linkage 6 on the
carburetor in the throttle  ap actuator on the
carburetor side.
Push the carburetor and air  ap onto the
stationary bolts.
Connect the primer suction line
4 to the
carburetor.
Connect the pulse line
1 and fuel line (red) 2 ,
and then connect the throttle cable 3 .
Position the carburetor and air  ap with the
red side on the outside.
Before installing the air  lter base, see Chap.
07 under Combination switch , and engage
the choke linkage 7 in the choke valve
actuator on the carburetor.
08 CARBURETOR
2
5
4
1