![background image](http://html.mh-extra.com/html/makita/ea3500s/ea3500s_original-instruction-manual_223312028.webp)
28
7-14. Instructions for periodic maintenance
To ensure long life, prevent damage and ensure the full functioning of the safety features the following maintenance must be
performed regularly. Guarantee claims can be recognized only if this work is performed regularly and properly. Failure to perform
the prescribed maintenance work can lead to accidents!
The user of the chain saw must not perform maintenance work which is not described in the instruction manual. All such work
must be carried out by a MAKITA service centre.
Section
General
Chain saw
Clean exterior, check for damage. In case of damage,
have repaired by a qualified service centre immediately
Saw chain
Sharpen regularly, replace in good time
7-1
Chain brake
Have inspected regularly at an authorized service centre
Guide bar
Turn over to ensure even wear of bearing surfaces
Replace in good time
6a-3,
6b-3, 6c-3
Starter cable
Check for damage. Replace if damaged.
7-10
Before each start
Saw chain
Inspect for damage and sharpness
7-1
Check chain tension
6a-3,
6b-3, 6c-3
Guide bar
Check for damage
Chain lubrication
Functional check
6-9
Chain brake
Functional check
6-15
Combination switch,
Safety locking button,
Throttle lever
Functional check
6-11
Fuel/oil tank cap
Check for tightness
Every day
Air filter
Clean (several times daily if necessary)
7-5
Guide bar
Check for damage, clean oil intake bore
7-3
Guide bar support
Clean, in particular the oil guide groove
6-10, 7-2
Idle speed
Check (chain must not run)
6-16
Every week
Fan housing
Clean to maintain good cooling air flow.
5
Air filter compartment
Clean to maintain good cooling air flow.
7-11
Fan compartment
Clean to maintain good cooling air flow.
7-11
Cylinder fins
Clean to maintain good cooling air flow.
7-12
Spark plug
Check and replace if necessary
7-6
Muffler
Check tightness of mounting, Check screws
5, 7-8
Spark arrester screen
(country specific)
Clean and replace if necessary
7-9
Chain guide
Check
Screws and nuts
Check their condition and that they are firmly secured.
Every 3 months
Suction head
Replace
7-13
Fuel, oil tanks
Clean
Annually
Chain saw
Check at an authorized service centre
Storage
Chain saw
Clean exterior, check for damage. In case of damage,
have repaired by a qualified service centre immediately
Guide bar/chain
Demount, clean and oil slightly
Clean the guide groove of the guide bar
7-3
Fuel, oil tanks
Empty and clean
Carburetor
Run empty
Summary of Contents for EA3500S
