11 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model:
DUR190U
DUR190L
DUR191U
DUR191L
Type of handle
Bike handle
Loop handle
Bike handle
Loop handle
No load speed
3: 6,000 min
-1
2: 5,100 min
-1
1: 3,500 min
-1
Overall length
(without cutting tool)
1,775 mm
Nylon cord diameter
2.0 - 2.4 mm
Applicable cutting tool and
cutting diameter
3-tooth blade
(P/N 191J34-5)
230 mm
4-tooth blade
(P/N 729025-2)
230 mm
Nylon cutting head
(P/N 126674-0)
300 mm
Plastic blade
(P/N 126642-3)
230 mm
Rated voltage
D.C. 18 V
Net weight
3.1 - 3.4 kg
2.9 - 3.2 kg
3.4 - 3.7 kg
3.2 - 3.5 kg
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications may differ from country to country.
•
The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi
-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 /
BL1840B / BL1850 / BL1850B / BL1860B
Charger
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
DC18SH
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above.
Use of any other battery cartridges
and chargers may cause injury and/or fire.
Recommended battery adapter
Battery adapter
PDC01
•
The battery adapter(s) listed above may not be available depending on your region of residence.
•
Before using the battery adapter, read instruction and cautionary markings on the battery adapter.
Summary of Contents for DUR190L
