![background image](http://html.mh-extra.com/html/makita/dts141/dts141_technical-information_1722694005.webp)
P 5/ 11
Fig. 7
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -3. Unit case complete
DISASSEMBLING
Slotted screwdriver
Slotted screwdriver
Unit case cover
Unit case complete
Bumper
1. Remove Bumper with a thin
slotted screwdriver.
2. Remove Unit case cover from Unit case complete by detaching
the claw of Unit case cover from the groove of Unit case complete
with a thin slotted screwdriver.
3. Put Flat washer 6 as a jig
onto Unit case complete.
4. Apply 1R286 on Flat washer 6 and press them with Arbor press to remove
Ball bearing 6801LLB and Oil seal 12 from Unit case complete.
(1) Separate Oil unit complete section from Unit case complete. (See
Fig. 3
.)
(2) Disassemble Unit case complete as drawn in
Fig. 7
.
Unit case cover
1R286
jig of Flat washer 6
(253804-1)
Unit case complete
Oil seal 12
Ball bearing
6801LLB