![background image](http://html.mh-extra.com/html/makita/dts141/dts141_technical-information_1722694003.webp)
P 3/ 11
Fig. 3
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -2. Oil unit complete and Gear section
DISASSEMBLING
(1) Disassemble Bit holder section. (See
Fig. 2
.)
(2) Disassemble Oil unit complete as drawn in
Fig. 3
.
(1) Assemble Oil unit complete section by reversing the disassembly procedure. (Refer to
bottom right
in
Fig. 3
.)
Note
: Do not forget to mount Flat washer 12.
(2) Assemble Oil unit complete section to Unit case complete while fitting four projections of Oil unit complete section
to four notches of Unit case complete as drawn in
Fig. 4
.
1. Remove Housing set R
by removing nine 3x16
Tapping screws.
2. Remove the entire of Oil unit section
and Brushless motor section from
Housing set L.
3. Pull out Oil unit section from
Brushless motor section.
4. Push Bit holder section toward a workbench
as shown below to remove Oil unit complete
section from Unit case complete.
5. Internal gear 51, Flat washer12, three Spur gears 22,
Carrier complete and Ball bearing 6806LLU can now be
removed from Oil unit complete.
Note
: Do not disassemble Oil unit complete.
ASSEMBLING
Internal gear 51
Flat washer12
Spur gear 22
(3pcs.)
Carrier
complete
Ball bearing
6806LLU
Oil unit complete
Unit case complete
Oil unit complete section
Fig. 4
Oil unit
complete
section
Unit case
complete
Oil unit
section
Brushless motor
section
Oil unit
section
Brushless motor
section
3x16 Tapping
screw (9pcs.)
Housing set R
Housing set L